Faults are displayed on the Home page within the E-Gen system state. When a fault is detected, the system state will display “ON/OFF” with “Warning Active” or “Fault Active”.
A warning level fault is a lower-priority issue that likely isn’t affecting the function of the unit currently, although may need to be addressed in the near future.
A fault level fault is typically a higher-priority issue that will prevent the regular function of the unity and will need to be addressed more immediately.
The Alarms page records the active fault code, fault level, fault type and provides a description of what the fault is. You can use the fault code table below to review the cause and recommended course of action for each fault.
If in doubt, contact CranePower by email: [email protected].
